Competitive Price for Light-62301 to kazakhstan Manufacturers

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

We aim to find out high quality disfigurement in the generation and provide the most effective services to domestic and abroad clients wholeheartedly for Best Portable Tire Inflator 2015 , Goodyear Air Compressor For Car , Vacuum Meaning , Being a young escalating company, we might not the most effective, but we're trying our greatest to generally be your fantastic partner.
Competitive Price for Light-62301 to kazakhstan Manufacturers Detail:


Product detail pictures:

Competitive Price for
 Light-62301 to kazakhstan Manufacturers detail pictures


Our improvement depends on the superior equipment, excellent talents and continuously strengthened technology forces for Competitive Price for Light-62301 to kazakhstan Manufacturers, The product will supply to all over the world, such as: Macedonia , United Arab Emirates , kazakhstan , we always keep our credit and mutual benefit to our client, insist our high quality service to moving our clients. always welcome the our friends and clients to come and visit our company and guid our business, if you are interested in our products, you can also submit your purchase information online, and we will contact you immediately, we keep our highly sincere cooperation and wish everything in your side are all well.


  • Kung Fu Maintenance demonstrates how to charge an air conditioner through the suction side only by feel. Get KFM’s favored Multi-Meter here http://amzn.to/2l8W9CO
    Get KFM’s favored AC Gauges here http://amzn.to/2kYgGb8
    Hire An HVAC Specialist http://amzn.to/2lktKek
    Air Duct Cleaning Services http://amzn.to/2lFTpun
    Central Air Conditioner Tune Up http://amzn.to/2lzJGoy
    Air Conditioner Repair Or Installation http://amzn.to/2lFsEGw
    Easiest Way To Get Universal EPA Certified Prep Manual http://amzn.to/2kIQdQC
    Get the Wet Dry Vacuum used in so many KFM videos http://amzn.to/2lFxi7u
    Get the Screwdriver used in so many KFM videos here http://amzn.to/2kHFoOF
    Get the Multi Tool Pliers used in so many KFM videos http://amzn.to/2kWTjPp
    Get The Kung Fu Maintenance book here http://amzn.to/2lEQPFk
    Or the Kung Fu Maintenance E book here for less than $5 http://amzn.to/2lEY8wD
    Get the Kung Fu Maintenance album (good driving music) “Up Beat” here http://amzn.to/2l41pZ1
    Get the Kung Fu Maintenance album (nice Instrumental music) “Entropy” here http://amzn.to/2kl2U0p
    I don’t work for any of the product companies listed however I do make a small commission on items ordered through the links.

    http://KungFuMaintenance.Com

    http://Blog.KungFuMaintenance.Com

    http://Arcade.KungFuMaintenance.Com http://VGBlog.KungFuMaintenance.Com

    http://TheMaintenanceEar.KungFuMaintenance.Com

    OK, we’ve got an AC just barely cool in here. Kind of low on freon. Ompressor’s pretty hot to the touch. Unit’s still running.

    It’s going to be charging up through the low side. You’ve got a tiny leak at the evaporator. So we’re going to be using a micro additive. Got our gauges calibrated.

    We’ve got a couple of things we can make better. Got our new fan capacitor. We could secure that up. Make that better.

    Make sure all our gauges are turned off here. And I’ll remove the cap on the low side. It’s blazing hot today. Probably 109 degrees out here today.

    Just going to try to get this going and get off the roof. It’s pretty humid today too, so not the easiest day to be up here. Looks like the Schrader valve cap needs to come out with the cap. It’s kind of stuck on the end there.

    Make sure we recover that. There’s our o-ring. Put that back in the cap for later use.

    Now we’re going to hook up our quick connect fitting. This is a low loss fitting. Prevent frostbite. Want to wear gloves. Wear safety glasses.

    Now we can check our reading up top. See what our pressures are. So we’re showing at about 30, which means we’re just a little bit low. And purge the line.

    Make sure all the valves are tight here. Pick up our refrigerant can at the end. Got my can of refrigerant up here. Going to set it up top and run the middle line.

    Charging port hooks up to the tank of refrigerant. OK. Open the line.

    And back down here, we’re going to go ahead and purge. Purge the line. Purge both sides. Now we’re ready to charge.

    Now, because the compressor is really hot, I’m going to dump some cold water. All I have today is cold water. And I actually prefer to use a little bit of ice to cool it down, speed up the charge. But I’ll be using the cold water instead.

    So this has been in the fridge for a while. That will help speed the charge up. Going to monitor the line. It’s already starting to feel a bit colder. I’m monitoring it with my wrist here.

    What we wanted is for this line here that goes down to the evaporator. And the temperature at the evaporator will start to backtrack up this line to the compressor. This is the suction line. It’s why we’re sucking in the refrigerant there from our tank up top here.

    But what I have is capillary tube system at my evaporator coil. And the capillary tube system is a metering device that only lets so much refrigerant through at a time. Now the deal is, the temperature of the evaporator coil needs to be about 40 degrees, which is above freezing. You know, water freezes at 32 degrees. So just keeping that coil temperature up above that amount will mean that our coil is not going to freeze up, and we’re going to be removing heat from inside the unit.

    Now as the evaporator coil reaches its 40 degree temperature, it’ll back up into this line. So this low side line is nice and chilly. And that’s going to tell us that our evaporator is that cold also. So that’s how we can kind of monitor and charge this unit up, charge it to where we need it to be.

    Again, with the capillary tube system, it’s pretty forgiving. You’d have to really try to overcharge it. Obviously, you don’t want to overcharge it. You want to avoid overcharging.

    But again, it meters the refrigerant at a fixed orifice rate. It’s a fixed size. Only lets so much refrigerant through at a time.

    The factory technical staff not only have high level of technology, their English level is also very good, this is a great help to technology communication.










    5 Stars By Rebecca 2016-6-28 18:47
    The factory workers have a good team spirit, so we received high quality products fast, in addition, the price is also appropriate, this is a very good and reliable Chinese manufacturers.

    5 Stars By Wendy 2016-9-11 19:11

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Car

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Plane

    WhatsApp Online Chat !